Woson Tanco 12 L Type D autoclave with Class B medical printer
Safe sterilization of a wide range of instruments.
The Woson New Tanco 12L compact autoclave is an indispensable piece of equipment that will work well in any beauty salon, nail salon and other places where it is important to maintain the sterility of instruments used during procedures. Sterilization in the highest class B medical autoclave provides full efficiency and safety of the process, which helps to maintain high standards of hygiene in the office. The equipment is designed to sterilize both medical and non-medical instruments, packed and unpacked, homogeneous, buried type A items and porous items. The device may only be operated by qualified personnel with knowledge and appropriate training in the operation of this type of equipment.
Improvements for increased functionality
The device is equipped with a control panel with LED display that allows you to select the appropriate programs or parameters and monitor the process in real time. The built-in thermal printer allows printing a confirmation of the sterilization process, where you can find information such as: date and time of the cycle, temperature and pressure changes. Additionally, there is a connector on the back of the unit that allows you to connect a dedicated printer if needed, and the USB input allows you to digitally save sterilization results on the included flash drive. Built-in tanks for distilled and used water significantly increase efficiency. The device has a distilled water quality control function. The self-diagnostic system informs you when an error occurs by displaying relevant messages, for example if the door is not closed or if it is necessary to drain the tank or replace the water, helping to reduce the risk of damage to the equipment.
Sterilization, testing and cleaning programs are available.
The autoclave is programmed for: 4 sterilization programs, 2 test programs allowing three tests: vacuum test, B&D test and Helix test, a regular maintenance and pipe cleaning program (automatic pipe cleaning) and a drying program to meet the requirements of a higher standard (drying function). This allows you to customize the parameters for individual needs and batch preparation. It is also possible to set and save your own sterilization parameters in individual mode (USER mode).
STERILIZATION PROGRAMS
Sterilization program Load type Temperature Pressure Vacuum generation rate Cycle time
"UNPACKED
" The program is designed to sterilize unpackaged items. 134°C 210 kPa 1x Sterilization time: 4 minutes; drying time: 9 minutes
"PACKAGED
" The program is designed to sterilize packaged items and nozzles. 134°C 210 kPa 3 times sterilization time: 5 minutes; drying time: 9 minutes
"PRION"
"PRONS" A program designed to inactivate prions, bacteria and viruses, etc. 134°C 210 kPa 3 times sterilization time: 18 minutes; drying time: 9 minutes
"PORISTIC"
"PORISTIC" Program designed for sterilization of cotton and similar items. 121°C 110 kPa 3 times sterilization time: 20 minutes; drying time: 18 minutes
Specification
medical grade B State-of-the-art sterilizers that allow the most efficient sterilization of unpackaged and packaged items, regardless of the type of instruments. They are distinguished by the creation of a fractionated pre-vacuum.
Legislative requirements The device is CE 0197 certified and complies with the requirements of the Medical Device Directive 93/42/EEC and Directive 97/23/EC. It also complies with EN 61010-1; EN 61010-2-040; EN 13060; EN 61326-1. The manufacturer has EN ISO 9001 and EN ISO 13485 certifications.
Capacity 12 liters Ideal for beauty salons and clinics. It has a basket with three trays to accommodate packed and unpacked instruments.
Built-in printer Thermal paper is used, avoiding the hassle of changing ink.
Sterilization of instruments in bulk or in packages. In both sterilization methods, the process is very efficient.
Control panel with LED display It makes it easy to select the appropriate program and set the parameters. During the process it displays temperature, pressure and time.
8 automatic programs 4 sterilization programs, 2 test programs, 1 cable cleaning program, 1 drying program.
Integrated distilled and used water tanks. The clean water tank is designed for distilled or deionized water for sterilization. Having a wastewater tank means no need for an additional external container.
Self-diagnostic system Displayed messages help avoid damage.
Stainless steel chamber The material used is designed for medical use and is durable, which proves the high quality of the device.
Warranty 24 months. The warranty period does not depend on the number of cycles performed.
Technical data
Certificates and standards CE 0197 (93/42/EEC, 97/23/EC),
EN 61010-1; EN 61010-2-040; EN 13060; EN 61326-1
Power 1600 W
Rated Voltage 220V AC ~ 240V AC, 50Hz ~ 60Hz
Maximum operating temperature 145°C
Maximum working pressure 2.5 bar (250 kPa)
Minimum working pressure -0.9 bar (90 kPa)
Time adjustment from 20 to 60 minutes for the program at 121°C or from 4 to 20 minutes for the program at 134°C
Drying time 0 to 60 minutes, stage duration 5 minutes
Vacuum multiplicity 1x, 3x or 5x
Packaging dimensions 652 x 549 x 486 mm
External dimensions 545 x 382 x 375 mm
Chamber material stainless steel
Chamber dimensions 251 x 155 x 155 mm
Please read the instructions carefully before use.
The set includes: autoclave, tray frame, three trays, handle (knob) for tray removal, hose (rope) for draining used water, power cord, door seal, operating instructions, technical data sheet, flash drive.
